Bring Multi-Color 3D Printing to Life
Bambu Lab's Automatic Material System (AMS) brings to you colour, the ultimate expression of emotions. You can now print without restriction in a variety of colours and materials.
Simple Support Removal
Bambu Lab printers using AMS can use snap-away support material or dissolvable filament to reduce the pain of removing supports.
No More Filament Leftover
Without AMS, replacing the spool manually when the filament runs out causes printing to stop and wastes filaments. With AMS, switching to a new spool is seamless, maintaining uninterrupted printing and reducing waste.
Backup for Filaments
Printing is never interrupted thanks to automatic spool switching. Never worry about running out of filament while you're sleeping or away again with the AMS filament backup function, which guarantees a smooth and uninterrupted printing process, prevents any filament waste, and encourages energy efficiency.
Superior Intelligence System
The AMS has attained unprecedented levels of intelligence thanks to a 32-bit MCU, sensor arrays, actuators, and a smart algorithm. It expertly manages filament loading and unloading, as well as fault detection and recovery.
Detecting Filament Winding
AMS can detect resistance at the tool head immediately and halt printing to prevent empty printing, which could be caused by tangled filament or a stuck spool.
Leave Wet Filaments Behind
Moisture-soaked filament can cause print quality issues, poor layer adhesion, and even nozzle clogging, which can result in a failed print.
Maintain the Filament's Dryness
The AMS has an airtight seal and absorbs moisture with the help of dessicant material to keep moisture away from the Filament. A Humidity Sensor detects the humidity inside the AMS and alerts the user when the humidity is too high or the dessicant needs to be replaced. Dry filament is required for the best print quality.
Automatic Filament Recognition
Bambu Lab filaments employ RFID, which the AMS reads to automatically identify and apply the best settings for your material. The RFID tag is automatically synchronised with Bambu Studio.
Support Up to 16 Different Colours
Each Bambu Lab AMS has four filament slots, and up to four AMS can be installed in parallel to produce stunning prints in up to 16 colours.
