Bambu Lab PLA Silk+
1.75 mm ± 0.03 | Chrome-Like Silk Gloss | Enhanced Layer Adhesion | 210-240°C | AMS Compatible | 1KG Spool
Incl. of all taxes • Free shipping
Bambu Lab PLA Silk+ - Gold
₹1,299
₹1,299
Bambu Lab PLA Silk+ Filament
Chrome-Like Silk Gloss | Enhanced Layer Adhesion | AMS Compatible | 1KG RFID Spool
Shiny like chrome, smooth like silk - and strong where generic silk gives up. Bambu Lab PLA Silk+ keeps the mirror-bright sheen that makes silk prints so striking, but adds the improved layer bonding those filaments lack, so you can slow the outer wall for maximum gloss without brittle, delaminating parts. Prints on any FDM machine at 210-240°C, on an RFID spool that works with every AMS Series unit.
Key Features of Bambu Lab PLA Silk+
Shiny Like Chrome, Smooth Like Silk
PLA Silk+ prints with a mirror-bright, chrome-like sheen and a smooth satin texture straight off the build plate - no sanding, polishing or coating required. Every curve catches the light, turning ordinary models into display pieces. For maximum gloss, simply slow the outer wall down to around 50 mm/s.
- Chrome-like gloss with a smooth silk texture.
- Display-ready straight off the printer - no post-processing.
- Lower the outer wall to ~50 mm/s for the best shine.
Enhanced Layer Adhesion - Shine Without the Weakness
Generic silk filaments trade strength for shine: slow the outer wall for gloss and you get brittle, delaminating parts. Silk+ is engineered with improved layer bonding, so it fully supports that adjustment. Cured parts reach 33 MPa tensile strength, 75 MPa bending strength and 18.5 kJ/m² impact strength - real, usable prints that also look brilliant.
- Tensile: 33 ± 4 MPa · Bending: 75 ± 4 MPa.
- Impact strength: 18.5 ± 1.6 kJ/m² - tougher than generic silk.
- Slow the outer wall for gloss without losing layer strength.
A Spectrum of Colours, Effortless Printing
Silk+ comes in vivid, light-catching colours - we stock Gold, Candy Red, Silver and Pink. Each 1KG spool carries an RFID tag and works with every AMS Series unit, so multi-colour jobs run hands-free. Filament ships dried and vacuum-sealed with desiccant, and prints on any FDM machine at 210-240°C.
- Gold · Candy Red · Silver · Pink - in stock at 3Ding.
- RFID spool - compatible with all AMS Series units.
- Nozzle 210-240°C · Bed 35-45°C · Speed < 250 mm/s.
What Can You Print?
Vases & Home Décor
Spiral vases and ornaments where the silk sheen turns every layer line into a highlight.
Cosplay & Props
Helmets, armour and weapon props with a metallic-looking finish straight off the printer.
Display Models
Cars, figures and collectibles that look chrome-plated without any painting.
Gifts & Keepsakes
Personalised pieces that look premium and finished with zero post-processing.
Trophies & Awards
Gold and silver silk give awards a genuine metallic presence at a fraction of the cost.
Multi-Colour Prints
RFID spools and AMS compatibility make colour-swapped silk models effortless.
Technical Specifications
Bambu Lab PLA Silk+
Available Colours
Tips for Best Results
Slow the Outer Wall for Gloss
Drop the outer wall speed to around 50 mm/s. This is what makes silk shine - and unlike generic silk, Silk+'s improved layer bonding fully supports it, so you don't pay for the gloss with weak parts.
Dry Before Use
Silk+ ships dried and vacuum-sealed, but transport can add moisture. Dry right after opening: 55°C for 8 hours in a blast drying oven, or 65-75°C for 12 hours on an X1 heatbed.
Store Sealed with Desiccant
Keep humidity below 20% RH - store in a sealed container with desiccant or in the AMS. Repeat drying before each long-term storage period for consistent results.
Use a Concentric Top Pattern
Setting the top surface pattern to concentric follows the shape of the part, so the silk sheen flows across top shells instead of breaking up along straight lines.
Start at 210-240°C
Run the nozzle at 210-240°C with a 35-45°C bed (use glue for adhesion) and keep speeds under 250 mm/s. Tune within that window for your printer and colour.
Frequently Asked Questions
Buy Bambu Lab PLA Silk+ Filament Online in India
Looking for a silk PLA filament in India that shines like chrome without the brittleness? Bambu Lab PLA Silk+ pairs a mirror-bright satin finish with genuinely improved layer adhesion - ideal for vases, cosplay props, display models and trophies.
At 3Ding.in, we stock genuine Bambu Lab filaments with fast shipping across India. The RFID spool works with every AMS Series unit, and Silk+ prints just as happily on any other FDM 3D Printer in our catalogue.
Want a different look? Explore our full range of 3D Printing filaments including Bambu Lab PLA, Elegoo PLA Matte, FilamentX PLA, ABS, PETG and TPU.