Elegoo Matte PLA
1.75 mm ±0.02 | Matte Macaron Finish | Hides Layer Lines | 190–230°C | 1KG Cardboard Spool
Incl. of all taxes • Free shipping
Elegoo Matte PLA
₹999
₹999
Elegoo PLA Matte - Matte-Finish 3D Printing Filament
Soft macaron colours with a low-gloss finish that makes layer lines nearly invisible.
PLA Matte trades the shiny plastic look of regular PLA for an elegant, velvety surface that photographs beautifully and needs little to no post-processing. It is also less prone to stringing and deformation than standard PLA, so prints come out cleaner the first time.
Why makers pick PLA Matte
- Matte, low-saturation macaron colours - prints look designed, not printed
- ±0.02 mm dimensional accuracy for consistent extrusion and precise fits
- Neatly wound, manually inspected cardboard spools - no mid-print tangles
- Dried and vacuum-sealed with desiccant - no clogs, no bubbles
- Eco-friendlier cardboard spool made from recycled material
Prints on virtually any 1.75 mm FDM printer at 190–230°C nozzle / 35–65°C bed.
Key Features
Matte macaron finish hides layer lines - no post-processing needed
Less stringing and deformation than standard PLA
±0.02 mm dimensional accuracy on a tight 1.75 mm diameter
Neatly wound cardboard spool, manually inspected - tangle-free
Dried and vacuum-sealed with desiccant - no clogging or bubbles
Prints on virtually all FDM printers at 190–230°C
Technical Specifications
Elegoo Matte PLA
Physical Properties
Mechanical Properties
(X-Y)30 MPa
Print Settings
Compatibility
About This Product
Elegoo PLA Matte is a low-gloss 3D Printer filament in soft macaron colours whose matte surface hides layer lines for a smooth, elegant look straight off the printer. It prints cleaner than standard PLA - less stringing and deformation - with an impressive ±0.02 mm dimensional accuracy on a tight 1.75 mm diameter. Each 1KG cardboard spool is neatly wound and manually inspected to prevent tangles, and every spool is fully dried and vacuum-sealed with desiccant so prints stay free of clogs and bubbles. Compatible with virtually all FDM printers at 190–230°C.