Sunlu Standard 3D Printing Resin - Grey

Sunlu Standard 3D Printing Resin

405 nm | 45 MPa Tensile Strength | Low Odour | 11 Colours | 333g to 4KG

₹1,399₹1,799Save 22%

Incl. of all taxes • Free shipping

In Stock•Ships immediately
1

₹1,399

1

Sunlu Standard 3D Printing Resin

405 nm | 45 MPa Tensile Strength | Low Odour | 11 Colours | Up to 4 KG

The go-to resin for everyday 3D printing. Sunlu Standard Resin balances accuracy and ease of use with excellent flowability, low odour, and strong mechanical properties — 45 MPa tensile strength, 57 MPa flexural strength, and 86 Shore D hardness. Available in 11 colours and six bottle sizes from 333g to 4000g, it suits beginners and professionals alike.

45 MPa
Tensile Strength
86 Shore D
Hardness
1.5–3.5s
Cure Time (Mono)
11
Colours
405 nm
Wavelength

Key Features of Sunlu Standard Resin

Smooth Flow & High Print Success Rate

Sunlu Standard Resin smooth flow high success rate

Sunlu Standard Resin's excellent flowability ensures uninterrupted printing from start to finish. The resin distributes evenly across every layer, reducing surface defects, minimising stringing and gaps, and significantly improving print success rates — even on complex geometries with fine overhangs and small features.

  • Excellent flowability for stable, consistent layer formation.
  • Minimises stringing, layer gaps, and surface defects.
  • Improved success rates for complex geometries.

Low Odour for Comfortable Printing

Sunlu Standard Resin low odour comfortable printing environment

Sunlu Standard Resin is formulated for minimal odour emission during printing, making it far more comfortable to use in home studios, offices, and shared spaces. Combined with its stable performance across extended print sessions, you can focus on your work rather than managing fumes.

  • Optimised low-odour formula — suitable for home and office use.
  • Stable performance across long multi-hour print sessions.
  • Consistent results with minimal user intervention.

Strong, Fast & Versatile — Built for Every Print

Sunlu Standard Resin 11 colours multiple bottle sizes 333g to 4kg

Sunlu Standard Resin delivers on all fronts. Cured parts are hard and strong (45 MPa tensile, 86 Shore D hardness) — ready to sand, paint, or display straight off the printer. Cure times are fast: just 1.5–3.5 seconds per layer on monochrome screens, keeping your print queue moving efficiently. It suits everyone from first-time users to daily production printers, with 11 colour choices (solids, translucents, and clear) and six bottle sizes from 333g up to 4000g — so you always buy exactly what you need.

  • Tensile: 45 MPa · Flexural: 57 MPa · Hardness: 86 Shore D.
  • Mono cure: 1.5–3.5 s/layer · Colour LCD: 4–15 s/layer.
  • Beginner-friendly and reliable for everyday professional use.
  • 11 colours — solids, translucents, clear · 333g to 4000g.

What Can You Print?

🎮

Miniatures & Figurines

Tabletop gaming pieces, collectibles, and character models with fine surface detail and good hardness for painting.

💎

Jewellery & Casting

Ring shanks, pendant masters, and wax-casting patterns with accurate dimensions and smooth surfaces.

⚙️

Engineering Prototypes

Concept models, fit-check parts, and functional mock-ups for rapid product development.

🏗️

Architectural Models

Scale models, decorative panels, and detailed structural elements for presentations and visualisation.

🎨

Art & Display Pieces

Sculptures, busts, and display models with a hard, paintable surface finish straight off the printer.

🎓

Education & Prototyping

Classroom demonstrations, lab models, and student projects — affordable, reliable, and easy to use.

Technical Specifications

Physical Properties

Wavelength
405 nm
Resin Viscosity
300–600 mPa·s
Mould Shrinkage
8.9 %
Heat Deflection Temp
55 °C
Bottle Sizes
333g · 500g · 1000g · 2000g · 3000g · 4000g

Mechanical Properties

Tensile Strength
45 MPa
Flexural Strength
57 MPa
Impact Strength (Izod)
40 J/m
Elongation at Break
13.5 %
Shore Hardness
86 Shore D

Print Settings

Layer Exposure (Mono LCD)
1.5–3.5 s
Layer Exposure (Color LCD)
4–15 s
Bottom Exposure (Mono)
10–50 s
Bottom Exposure (Color)
20–70 s
Bottom Layers
5–10 Layers
Lift Speed
60–120 mm/min

Compatibility

Printer Type
LCD / DLP / SLA
Compatible Printers
Anycubic, Elegoo, Creality, Phrozen, all 405nm printers
Wash Method
Isopropyl Alcohol (IPA)
Shelf Life
1 Year

Available Colours

Grey
Dark Grey
Black
White
Beige
Orange
Green
Clear
Clear Red
Clear Green
Clear Blue

Tips for Best Results

01

Shake Well Before Use

Shake the bottle for 1–2 minutes before each session. Pigments settle during storage — thorough mixing ensures even colour and predictable curing across every layer.

02

Calibrate Your Exposure

Start with 1.5–2 seconds for monochrome screens or 4–8 seconds for colour LCD. Run a calibration matrix print first to dial in the exact exposure for your printer and layer height.

03

Use IPA for Washing

Wash cured prints in isopropyl alcohol (IPA) for 1–3 minutes. An ultrasonic cleaner or dedicated wash station gives the best results. Rinse with clean IPA then air dry.

04

Post-Cure for Full Strength

After washing and drying, UV cure under a 405 nm curing station for 5–15 minutes. This brings the resin to its maximum hardness (86 Shore D) and tensile strength (45 MPa).

05

Store Correctly

Keep sealed in a cool, dark place away from sunlight and UV sources. Filter unused vat resin back into the bottle. Ideal storage temperature 15–35°C. Shelf life approximately 1 year.

Frequently Asked Questions

Is Sunlu Standard Resin good for beginners?
Yes — Sunlu Standard Resin is specifically designed to balance accuracy and ease of use. It is forgiving with exposure settings, has good flowability to reduce print failures, and works reliably on virtually all 405 nm LCD, DLP, and SLA printers.
What printers is Sunlu Standard Resin compatible with?
Sunlu Standard Resin works with all 405 nm LCD, DLP, and SLA 3D printers including Anycubic Photon series, Elegoo Mars/Saturn, Creality Halot, Phrozen Sonic, and many more. Both monochrome and colour LCD screens are supported.
What exposure time should I use?
For monochrome LCD screens, start with 1.5–3.5 seconds per layer and 10–50 seconds for bottom layers. For colour LCD, use 4–15 seconds per layer and 20–70 seconds for bottom layers. Always run a calibration print first.
Can I mix Sunlu Standard Resin colours?
Yes — you can mix colours within the Standard Resin range to create custom shades. Ensure thorough mixing for consistent results. Avoid mixing with other resin types (e.g., ABS-like or water-washable) as this can affect mechanical properties.
Do I need to post-cure Sunlu Standard Resin?
Yes. Post-curing under a 405 nm UV station for 5–15 minutes after IPA washing significantly improves final hardness (86 Shore D) and tensile strength (45 MPa). Skipping post-cure results in softer, weaker parts.
What makes Sunlu Standard Resin different from ABS-Like resin?
Standard Resin offers higher tensile strength (45 MPa vs 26 MPa) and hardness (86 Shore D vs 77 Shore D), making it better for hard, rigid parts. Sunlu ABS-Like Resin offers higher impact resistance (120 J/m) and elongation (24%) for tougher, more flexible parts. Both use IPA for washing; for water-based cleaning, choose the Water-Wash variant.

Buy Sunlu Standard 3D Printing Resin Online in India

Looking for affordable, reliable 3D printer resin in India? Sunlu Standard Resin is the everyday workhorse for makers, hobbyists, and professionals who need consistent quality at a competitive price. With 11 colour options and six bottle sizes, it adapts to any project and budget.

At 3Ding.in, we stock genuine Sunlu resins with fast shipping across India. Our team can help you choose the right resin variant for your application — whether you need standard, ABS-like, or water-washable formulas.

Pair Sunlu Standard Resin with a compatible resin 3D printer and a wash & cure station for a complete, efficient post-processing workflow.

← Back to Materials