Bambu Lab
Bambu Dual-Texture PEI Plate
Two Print Surfaces in One Magnetic Plate
Textured + Smooth SidesStrong First-Layer AdhesionSelf-Release When CooledUsable Size: 256 x 256mmFits P1S, X1C, P2S, H2
₹5,000
Incl. of all taxes • Free shipping
Out of Stock•Currently unavailable
Bambu Dual-Texture PEI Plate
₹5,000
₹5,000
Bambu Dual-Texture PEI Plate
Two surfaces in one plate: a textured PEI side for strong first-layer adhesion and easy self-release, and a smooth PEI side for high Z-axis precision and a matte bottom finish. Built on a magnetic stainless steel plate that holds flat and helps prevent warping.
Textured PEI side
- Excellent first-layer adhesion — no glue needed for most filaments.
- Self-release when cooled — prints lift off once the bed returns to room temperature.
- Durable — withstands repeated heating and cooling cycles.
Smooth PEI side
- High Z-axis precision — greater accuracy and consistency in the vertical dimension.
- Smooth matte finish — leaves a clean matte texture on the bottom surface of the print.
Specifications
| Material | PEI powder coating + magnetic stainless steel plate + smooth PEI sheet |
|---|---|
| Thickness | Textured PEI 0.075 mm / Smooth PEI 0.125 mm / Stainless steel 0.4 mm |
| Colour | Gold and Charcoal Grey |
| Usable print size | 256 x 256 mm |
| Packaging size | 300 x 270 x 17 mm |
| Packaging weight | 0.45 kg |
Recommended bed temperatures
| Material | Heatbed | Glue on smooth side | Glue on textured side |
|---|---|---|---|
| PLA / PLA-CF / PLA-GF | 45–65°C | No | No |
| PETG / PETG-CF | 60–80°C | Yes | No |
| ABS | 90–100°C | Yes | No |
| ASA | 90–100°C | Yes | No |
| TPU | 35–45°C | Yes | Yes |
| PC / PC-CF | 90–110°C | Yes | Yes |
| PET-CF | 80–100°C | Yes | No |
Care
Clean regularly with detergent and water — dust and grease reduce adhesion. Never clean with acetone. Allow the plate to cool before removing prints. The plate is a consumable part and will degrade with use.
About This Product
Bambu Dual-Texture PEI Plate 256x256mm - textured side for adhesion, smooth side for Z precision. Fits Bambu Lab P1S, X1C and P2S. Buy at 3Ding.